e-mail: amministrazione@sibimex.com
tel: 0039 02 9052513
C11MT

HEADSTOCK:

The headstock is manufactured of a single, well ribbed and proportioned casting of special stabilized cast iron.

The headstock unit design has been fulfilled so to achieve the maximum of rigidity and less vibration.

All the gears and spline shafts are made in high quality steel, hardened and ground.

The lubrication is automatic, realized by one gear pump and set of pipes.

The rotation and reverse running is obtained by a mechanical double multidisc clutch, while the spindle is stopped by mechanical ferodo brake.

The lathe is equipped as well with another electronic emergency brake for immediate stopping of the spindle in case of emergency, which is activated by the pedal or the red “Emergency“ stop buttons.

SPINDLE:

It is made of high resistance steel, casehardened, tempered and ground.

It is supported by precision, taper roller bearings SKF or FAG.

It is equipped with rear lock ring for the lash adjustment.

BED:

Heavy, large, strongly ribbed, cast iron bed with removable bridge, gives the machine great rigidity. The guideways are induction hardened and ground.

The guideways lubrication is automatic.

NORTON BOX (FEED BOX):

The norton box insure the execution of large range of automatic longitudinal and cross feeds and metric, whitworth, modular and diametral pitch threads without changing gears.

The lubrication of the norton box is automatic, realizes by a piston pump and pipes.

CARRIAGES:

Slides and carriages are well proportioned and equipped with steel tapered gibs for the lash adjustment.

APRON:

In the apron made of casting are placed all the controls for longitudinal and cross feed as well as the threading device.

It is supplied with a safety device which prevents the thread cutting and feed device acting simultaneously.

In the apron there is an automatic piston pump which lubricate the guideways of the lathe and the thread cutting nut.

On the apron is mounted also the electric motor which provides rapid longitudinal and cross travels of the carriage.

TAILSTOCK:

Strongly build with casehardened, tempered and ground quill, provided with extraction slot.

ELECTRICAL EQUIPMENT:

The electrical equipment consists of low voltage components, SCHNEIDER brand - Germany.

Technical Parameter Unit C11MT
Height of centersmm300
Swing over slidewaysmm600
Swing over carriagemm400
Swing in gapmm800
Slideways widthmm400
Distance between centers (DBC)mm1000 / 1500 / 2000 / 3000 / 4000 / 5000
Spindle nose “CAM-LOCK”No.8
Spindle boremm80
Internal spindle taperMetric90
Number of spindle speeds 16
Spindle speed rangerpm11.5 - 2000
Main motor powerkW7.5
Number of feeds 160
Longitudinal feed rangemm/rev0.02 - 12
Cross feed rangemm/rev0.01 - 6
Longitudinal rapid traverse speedmm/min3800
Cross rapid traverse speedmm/min1900
Number of threads 80
Metric thread rangemm0.25 - 120
Inch thread rangetpi120 - 1/4
Module thread rangeModule0.0625 - 30
DP thread rangeDP480 - 1
Cross slide travelmm315
Top slide travelmm130
Quill diametermm90
Quill travelmm230
Quill taperMorse5
Length at DBC 2000 mmmm3600
Widthmm1250
Heightmm1550
Weight at DBC 2000 mmkg3100

Standard Equipment

  • Quick change toolholder with 5 holders
  • Back plate for chuck
  • Coolant system with electric pump
  • Spindle splash guard with microswitch
  • Toolholder guard
  • Low voltage machine lamp
  • Rear metal splash guard
  • Spindle dead center with adapter sleeve
  • Instruction manual
  • “CE“ norms Certificate

Optional Equipment

  • Selfcentering 3-jaw chuck dia. 250 mm
  • Independent 4-jaw chuck dia. 500 mm
  • Travelling steady 15-200 mm
  • Steady rest small size 15-200 mm
  • Steady rest big size I 180-340 mm
  • Taper turning attachment +/-10 deg
  • Drive plate with set of lathe dogs
  • Live center MT 5
  • Drill chuck with arbor
  • 3-axis digital readout system
  • 2-axis digital readout system
Sibimex and the Sibimex logo are registered trademarks of Sibimex Italiana Srl.