e-mail: amministrazione@sibimex.com
tel: 0039 02 9052513
C10T / C10TM / C10TH

HEADSTOCK:

The headstock is manufactured of a single, well ribbed and proportioned casting of special stabilized cast iron.

The headstock unit design has been fulfilled so to achieve the maximum of rigidity and less vibration.

All the gears and spline shafts are made in high quality steel, hardened and ground.

The lubrication is automatic, realized by one gear pump and set of pipes.

The rotation and reverse running is obtained by a mechanical double multidisc clutch, while the spindle is stopped by mechanical ferodo brake.

The lathe is equipped as well with another electronic emergency brake for immediate stopping of the spindle in case of emergency, which is activated by the pedal or the red “Emergency“ stop buttons.

SPINDLE:

It is made of high resistance steel, casehardened, tempered and ground.

It is supported by precision, taper roller bearings SKF or FAG.

It is equipped with rear lock ring for the lash adjustment.

BED:

Heavy, large, strongly ribbed, cast iron bed with removable bridge, gives the machine great rigidity. The guideways are induction hardened and ground.

The guideways lubrication is automatic.

NORTON BOX (FEED BOX):

The norton box insure the execution of large range of automatic longitudinal and cross feeds and metric, whitworth, modular and diametral pitch threads without changing gears.

The lubrication of the norton box is automatic, realizes by a piston pump and pipes.

CARRIAGES:

Slides and carriages are well proportioned and equipped with steel tapered gibs for the lash adjustment.

APRON:

In the apron made of casting are placed all the controls for longitudinal and cross feed as well as the threading device.

It is supplied with a safety device which prevents the thread cutting and feed device acting simultaneously.

In the apron there is an automatic piston pump which lubricate the guideways of the lathe and the thread cutting nut.

On the apron is mounted also the electric motor which provides rapid longitudinal and cross travels of the carriage.

TAILSTOCK:

Strongly build with casehardened, tempered and ground quill, provided with extraction slot.

ELECTRICAL EQUIPMENT:

The electrical equipment consists of low voltage components, SCHNEIDER brand - Germany.

Technical Parameter Unit C10T C10TM C10TH
Height of centersmm330380430
Swing over bedmm660760860
Swing over cross slidemm420520620
Swing in gapmm8509501050
Width of bedmm560
Distance between centers (DBC)mm1500 / 2000 / 3000 / 4000 / 5000 / 6000
Spindle nose DIN55027No.11
Spindle boremm103132132
Internal spindle taperMetric120140140
Number of spindle speeds 151717
Spindle speed rangerpm9 - 13207.5 - 10157.5 - 1015
Main motor powerkW1111 (15) 15
Number of feeds 150
Longitudinal feed rangemm/rev0.039 - 18
Cross feed rangemm/rev0.02 - 9
Longitudinal rapid traverse speedmm/min3800
Cross rapid traverse speedmm/min1900
Number of threads 76
Metric thread rangemm0.5 - 180
Inch thread rangetpi60 - 1/6
Module thread rangeModule0.125 - 45
DP thread rangeDP240 - 2/3
Cross slide travelmm410410435
Top slide travelmm150
Quill diametermm105
Quill travelmm225
Quill taperMorse6
Length at DBC: 
1500 mmmm3470
2000 mmmm3970
3000 mmmm4970
4000 mmmm5970
5000 mmmm6970
6000 mmmm7970
Widthmm165016501700
Heightmm150016001730
Weight at DBC: 
1500 mmkg392042204420
2000 mmkg417044704670
3000 mmkg475050505250
4000 mmkg520055005700
5000 mmkg578060806280
6000 mmkg623065306730

Standard Equipment

  • Quick change toolholder with 5 holders
  • Back plate for chuck
  • Coolant system with electric pump
  • Spindle splash guard with microswitch
  • Toolholder guard
  • Low voltage machine lamp
  • Rear metal splash guard
  • Spindle dead center with adapter sleeve
  • Instruction manual
  • “CE“ norms Certificate

Optional Equipment

  • Selfcentering 3-jaw chuck:
    - dia. 315 mm (for C10T)
    - dia. 400 mm (for C10TM and C10TH)
  • Independent 4-jaw chuck:
    - dia. 600 mm (for C10T)
    - dia. 760 mm (for C10TM and C10TH)
  • Travelling steady: 20-200 mm
  • Steady rest small size:
    - 20-200 mm (for C10T and C10TM)
    - 50-250 mm (for C10TH)
  • Steady rest big size I:
    - 180-430 mm (for C10T and C10TM)
    - 220-450 (for C10TH)
  • Steady rest big size II:
    - 200-520 mm (for C10TM)
    - 420-620 mm (for C10TH)
  • Taper turning attachment +/-10 deg
  • Drive plate with set of lathe dogs
  • Live center MT 6
  • Drill chuck with arbor
  • 3-axis digital readout system
  • 2-axis digital readout system
Sibimex and the Sibimex logo are registered trademarks of Sibimex Italiana Srl.