e-mail: amministrazione@sibimex.com
tel: 0039 02 9052513
C10T.10 / C10T.12

The main purpose of C10T.10 / C10T.12 lathes is to process pipes. Accordingly, this type of machines is widely used in the oil industry. These lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters.

The lathe is equipped with two external tube supports with steady rests which allows the processing of long pipes.

HEADSTOCK:

The headstock is manufactured of a single, well ribbed and proportioned casting of special stabilized cast iron.

The headstock unit design has been fulfilled so to achieve the maximum of rigidity and less vibration.

All the gears and spline shafts are made in high quality steel, hardened and ground.

The lubrication is automatic, realized by one gear pump and set of pipes.

The rotation and reverse running is obtained by a mechanical double multidisc clutch, while the spindle is stopped by mechanical ferodo brake.

The lathe is equipped as well with another electronic emergency brake for immediate stopping of the spindle in case of emergency, which is activated by the pedal or the red “Emergency“ stop buttons.

SPINDLE:

It is made of high resistance steel, casehardened, tempered and ground.

It is supported by precision, taper roller bearings SKF or FAG.

It is equipped with rear lock ring for the lash adjustment.

BED:

Heavy, large, strongly ribbed, cast iron bed with removable bridge, gives the machine great rigidity. The guideways are induction hardened and ground.

The guideways lubrication is automatic.

NORTON BOX (FEED BOX):

The norton box insure the execution of large range of automatic longitudinal and cross feeds and metric, whitworth, modular and diametral pitch threads without changing gears.

The lubrication of the norton box is automatic, realizes by a piston pump and pipes.

CARRIAGES:

Slides and carriages are well proportioned and equipped with steel tapered gibs for the lash adjustment.

APRON:

In the apron made of casting are placed all the controls for longitudinal and cross feed as well as the threading device.

It is supplied with a safety device which prevents the thread cutting and feed device acting simultaneously.

In the apron there is an automatic piston pump which lubricate the guideways of the lathe and the thread cutting nut.

On the apron is mounted also the electric motor which provides rapid longitudinal and cross travels of the carriage.

TAILSTOCK:

Strongly build with casehardened, tempered and ground quill, provided with extraction slot.

ELECTRICAL EQUIPMENT:

The electrical equipment consists of low voltage components, SCHNEIDER brand - Germany.

Technical Parameter Unit C10T.10 C10T.12
Height of centersmm400
Swing over bed mm800
Swing over cross slidemm560
Swing in gapmm990
Width of bedmm560
Distance between centers (DBC)mm1500 / 2000 / 3000 / 4000 / 5000 / 6000
Spindle nose DIN 55027No.A 20 / A 2.20
Spindle boremm260315
Number of spindle speeds 12
Spindle speed rangerpm8 - 400 (10 - 480)
Main motor powerkW11 (15)
Number of feeds 152
Longitudinal feed rangemm/rev0.039 - 15
Cross feed rangemm/rev0.02 - 7.5
Number of threads 76
Metric thread rangemm0.5 - 150
Inch thread rangetpi60 - 1/5
Module thread rangeModule0.125 - 37.5
DP thread rangeDP240 - 4/5
Cross slide travelmm410
Top slide travelmm150
Quill diametermm105
Quill travelmm225
Quill taperMorseNo. 6
Length at DBC 2000 mmmm
Widthmm
Heightmm
Weight at DBC 2000 mmkg60006100

Standard Equipment

  • Rapid change toolholder with 5 holders.
  • 2 pc. back plate for chuck dia. 500 mm.
  • Coolant system with electrical pump.
  • 2 pc. 4-jaw independent chuck:
    - dia. 580 mm (for C 10T.10);
    - dia. 630 mm (for C 10T.12).
  • 2 pc. external tube support with steady rest:
    - dia. 60 – 260 mm (for C 10T.10);
    - dia. 120 – 320 mm (for C 10T.12).
  • 2 pc. spindle guard with microswitch.
  • Tool holder protection.
  • Taper turning attachment.
  • Law voltage machine lamp.
  • Rear metal chip protection.
  • Instruction manual.
  • “CE“ norms Certificate.

Optional Equipment

  • Self centering 3-jaw chuck dia. 500 mm
  • Travelling steady 20 – 200mm
  • Steady rest 20 – 200 mm
  • Steady rest 180 - 430 mm
  • Live center MT 6
  • 3-axes digital readout system
  • 2-axes digital readout system
Sibimex and the Sibimex logo are registered trademarks of Sibimex Italiana Srl.