- Universal lathes
- Variable speed lathes
- Lathes for machining of pipes
- CNC lathes
- Universal milling machines
- Universal milling machines with high speed head
- Slotting machines
- Radial drilling machines
- Column drilling machines
- CNC machining centers
Rigid machine frame of high quality cast iron with wide induction hardened and ground guideways.
Powerful main motor with frequency invertor Schneider and 4 step manual control gear box ensure high value of the spindle torque and infinitely variable speed.
High repeatability and positioning accuracy ensured by pre loaded ball screws and powerful servo motors on Z and X axes.
The CNC Siemens 808 D Advanced is an intuitive easy to learn control system with extensive cycle options. The CNC systems and servo drives Fagor, Fanuc and Heidenhain available also.
Two electronic hand wheels on the control panel for manual operation.
Manual tool turret Multifix type or automatic turret head Baruffaldi or Duplomatic according to the clients’ choice.
Powerful coolant system and a central lubrication system are included in the standard equipment of the machine.
|Technical Parameter||Unit||LT C10T.10||LT C10T.12|
|Height of centers||mm||400|
|Swing over bed||mm||800|
|Swing over cross slide||mm||560|
|Width of bed||mm||560|
|Distance between centers (DBC)||mm||1500 / 2000 / 3000 / 4000 / 5000 / 6000|
|Spindle nose DIN 55027||No.||A 20 / A2 20|
|Front bearing diameter||mm||380|
|Number of spindle speeds sub-ranges||4|
|Spindle speeds sub-ranges (stepless):|
|I subrange||rpm||8 - 40|
|II subrange||rpm||16 - 80|
|III subrange||rpm||40 - 200|
|IV subrange||rpm||80 - 400|
|Longitudinal feed (Z-axis)||m/min||8 (max)|
|Cross feed (X-axis)||m/min||8 (max)|
|Rapid traverse (Z and X axes)||m/min||8 (max)|
|Cross slide max. travel||mm||390|
|Ball screw on Z-axis||mm||50 x 10|
|Ball screw on X-axis||mm||32 x 5|
|Quill taper||Morse||No. 6|
|Main drive power||kW||18.5|
|Z-axis servo drive||kW/Nm||3.77 / 18|
|X-axis servo drive||kW/Nm||2.29 / 11|
|Spindle max torque||Nm||3500|
|Z-axis tow strength||daN||1250|
|X-axis tow strength||daN||1050|
|Tool holder||Manual Multifix type or automatic Baruffaldi / Duplomatic|
|Weight at DBC 3000 mm||kg||6000||6100|
|CNC control||Siemens (Heidenhain / Fanuc / Fagor)*|
- Powerful main motor of 18.5 kW with frequency inverter and gear box with manually selected 4 speed ranges.
- 2 electronic hand wheels for manual operating.
- Centralized lubrication system.
- Powerful coolant system with 3 phase electrical pump.
- 2 external tube supports with steady rests.
- For the machine’s computer numerical control system, the client is allowed to choose among the latest versions of the systems of Fanuc, Siemens, Fagor, or Hiedenhein.